YS640 using high temp magnets on the heat deflector

BigBadGus

* Abilene *

• Joined: September 26th, 2014, 5:57 pm
• Posts: 32
• Location: Australia

YS640 using high temp magnets on the heat deflector

So I was thinking about using some magnets to hold some foil in place when i wrap the heat deflector before a cook.

As of late i haven't been foiling it but I'm getting lazy and leave all the oil on it and I'm getting sick of scraping everything off.

what sort of magnets would withstand bbq temps without sliding off?

Conumdrum

* Kingman *

• Joined: September 3rd, 2014, 11:04 pm
• Posts: 422

Re: YS640 using high temp magnets on the heat deflector

Use heavy bolts and washers. Many magnets lose thier magnetics when heated.

Rorkin

* Abilene *

• Joined: April 23rd, 2016, 10:22 am
• Posts: 30
• Location: Chevy Chase Md, Tilghman, Md

Re: YS640 using high temp magnets on the heat deflector

THese are supposed to be high temperature.. But who knows

https://www.apexmagnets.com/magnets/sam ... oCBe_w_wcB

Rorkin

* Abilene *

• Joined: April 23rd, 2016, 10:22 am
• Posts: 30
• Location: Chevy Chase Md, Tilghman, Md

Re: YS640 using high temp magnets on the heat deflector

THese are supposed to be high temperature.. But who knows

https://www.apexmagnets.com/magnets/sam ... oCBe_w_wcB

These magnets good to 575 but instructions say, do not burn as will give off toxic gas..Hmmmm

Conumdrum

* Kingman *

• Joined: September 3rd, 2014, 11:04 pm
• Posts: 422

Re: YS640 using high temp magnets on the heat deflector

Big bolts and washers. There isn't much air flow at all above the diffuser plate. Works for me.